상품 정보
상품 상세설명
3" A300 Aluminum
Up to 255 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton®
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 11/16 Inch (11mm)
Max Suction Lift (Dry): 20ft-H20 (6.1m)
Max Suction Lift (Wet): 31ft-H20 (9.4m)
Air Inlet: 3/4 Inch FNPT
![]()
3" A300 Aluminum
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A300-BAA-GGNN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-GGNN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-GTNN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-GTNN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-SSEE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-SSEE-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-TTYT-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-VVYV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-BAA-VVYV-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | BSPBSP Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-GGNN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-GGNN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-GTNN-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-GTNN-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-SSEE-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-SSEE-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-TTYT-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-TTYT-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-VVVV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-VVYV-B30 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-NAA-VVYV-B40 | AluminumGeneral Purpose metal, suitable for water, oils, most solvents, most paints. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | NPT | Suction Center Front/Discharge Center Rear |
3" A300 Stainless
Up to 255 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE, Viton®
Liquid Connections Available in: ANSI/DIN Flange
Max Solids: 11/16 Inch (11mm)
Max Suction Lift (Dry): 20ft-H20 (6.1m)
Max Suction Lift (Wet): 31ft-H20 (9.4m)
Air Inlet: 3/4 Inch FNPT
![]()
3" A300 Stainless
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A300-FA3-GG3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-GG3N-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-GN3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-GN3N-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-GT3N-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-GT3N-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-SS3E-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-SS3E-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-TT3T-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-TT3T-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | PTFEThermoplastic material that is inert to most chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-VV3V-B70 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center RearSuction Center Front/Discharge Center Rear |
| A300-FA3-VV3V-B80 | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | AluminumAluminum | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | Stainless SteelCorrosion Resistant Steel, suitable for nitric acid, chlorinated solvents, caustics and marine applications. | Viton®Elastomer with good chemical resistance to a wide variety of chemicals. | ANSI / DIN FlangeANSI / DIN Flange Connection | Suction Center Front/Discharge Center Rear |
3" P300 Polyethylene
Up to 255 GPM
Elastomer Available in: EPDM, PTFE
Liquid Connections Available in: FNPT, FBSPT, ANSI/DIN Flange
Max Solids: 9/16 Inch (15mm)
Max Suction Lift (Dry): 16.4ft-H20 (5m)
Max Suction Lift (Wet): 29.5ft-H20 (9m)
Air Inlet: 3/4 Inch FNPT
3" P300 Polyethylene
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| P300-AHH-EEHE-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | HDPE High-density polyethylene | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | ANSI FlangeANSI Flange Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-AHH-PTHT-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | HDPE High-density polyethylene | PTFEThermoplastic material that is inert to most chemicals. | ANSI FlangeANSI Flange Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-BHH-EEHE-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | HDPE High-density polyethylene | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | BSPBSP Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-BHH-PTHT-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | HDPE High-density polyethylene | PTFEThermoplastic material that is inert to most chemicals. | BSPBSP Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-DHH-EEHE-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | HDPE High-density polyethylene | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | DIN FlangeDIN Flange Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-DHH-PTHT-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | HDPE High-density polyethylene | PTFEThermoplastic material that is inert to most chemicals. | DIN FlangeDIN Flange Connection | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-NHH-EEHE-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | HDPE High-density polyethylene | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT | Center Suction & Discharge w/ 180° Adjustable RotationCenter Suction & Discharge w/ 180° Adjustable Rotation Front to back. |
| P300-NHH-PTHT-G70 | FDA Buna-NFDA accepted Buna-N. | HDPE (High-density Polyethylene)HDPE (High-density Polyethylene) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | HDPE High-density polyethylene | PTFEThermoplastic material that is inert to most chemicals. | NPT | Center Suction & Discharge w/ 180° Adjustable Rotation |
사용후기
등록된 사용후기
사용후기가 없습니다.
상품문의
등록된 상품문의
상품문의가 없습니다.
배송정보
배송 안내 입력전입니다.교환/반품
교환/반품 안내 입력전입니다.