ALL-FLO ALL-FLO 1/4" AIR DIAPHRAGM PUMP
페이지 정보
작성자건아테크 댓글 0건 조회 1,585회 작성일 18-10-15 16:09본문
1/4" A025 Polypropylene
Up to 4.3 GPM
Elastomer Available in: Santoprene®, PTFE,Geolast®
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/16 Inch (1.6mm)
Max Suction Lift (Dry): 15ft-H20 (4.5m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1/4" A025 Polypropylene
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A025-SQP-GTPN-Y70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | NitrileGeneral purpose elastomer used on water and most non synthetic oils. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A025-SQP-STPE-Y70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A025-SQP-TTPT-Y70 | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only) |
1/4" A025 PVDF
Up to 4.3 GPM
Elastomer Available in: Santoprene®, PTFE
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/16 Inch (1.6mm)
Max Suction Lift (Dry): 17ft-H20 (5.0m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
![]()
1/4" A025 PVDF
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A025-SQK-STKE-Y70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A025-SQK-TTKT-Y70 | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | PVDFPolyvinylidene Fluoride suitable in applications requiring the highest purity, strength, and resistance to solvents, acids, bases. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only) |
1/4" A025 Conductive Nylon
Up to 4.3 GPM
Elastomer Available in: Geolast®, Santoprene®, PTFE
Liquid Connections Available in: FNPT, FBSPT
Max Solids: 1/16 Inch (1.6mm)
Max Suction Lift (Dry): 17ft-H20 (5.0m)
Max Suction Lift (Wet): 26ft-H20 (7.9m)
Air Inlet: ¼ Inch FNPT
1/4" A025 Conductive Nylon
| Part No. | Fluid End | Air End | Diaphragms | Valve/Ball | Valve Seats | O-Rings | Connection Type | Fluid Porting |
|---|---|---|---|---|---|---|---|---|
| A025-SQY-GTYN-YF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | Geolast®Injection molded thermoplastic material with characteristics similar to Nitrile. Has excellent abrasion resistance. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A025-SQY-STYE-YF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | Santoprene®Injection molded thermoplastic material with characteristics similar to EPDM. Has excellent abrasion resistance. | PTFEThermoplastic material that is inert to most chemicals. | PolypropyleneA non-metallic material, suitable for water, caustics, soap solutions, mild acids and general purpose applications. | EPDMGeneral purpose elastomer with good resistance to many acids and basis. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only)Suction Left/ Discharge Left (NPT/BSP Only) |
| A025-SQY-TTYT-YF0 | Conductive Nylon Stainless Steel filled Nylon, suitable for most solvents and alcohols. | Polypropylene (Glass filled)Polypropylene (Glass filled) | PTFEThermoplastic material that is inert to most chemicals. | PTFEThermoplastic material that is inert to most chemicals. | NylonA non-metallic material, suitable for most solvents and oils. | PTFEThermoplastic material that is inert to most chemicals. | NPT (BSP)NPT(BSP) Connection | Suction Left/ Discharge Left (NPT/BSP Only) |
댓글목록
등록된 댓글이 없습니다.
